Swipe left or tap Next ▶ to turn the page.
Select any text to highlight it or add a note. Tap a diagram to enlarge it.
Hardware and Windows: PC Parts, Boot Process, Software and Drivers
- ✔ Name every major PC part, what it does and the symptom when it fails
- ✔ Explain the boot process from power button to login screen and find where it breaks
- ✔ Use the core Windows tools an L1 engineer opens every day
- ✔ Install, remove and repair software and drivers safely
What an L1 engineer actually touches
In an L1 helpdesk job, most tickets on day one are about a laptop that will not start, a slow PC, an app that will not install or a device that is "not detected".
An L1 (Level 1) support engineer is the first person a user reaches. You take the call, chat or ticket, find out what is wrong, fix the common problems yourself and pass the rest to L2 with good notes. To do that well you need a clear picture of three layers:
- Hardware: the physical parts inside the laptop or desktop.
- Operating system (OS): Windows, which manages the hardware and runs programs.
- Software and drivers: the applications people use, and the small programs that let Windows talk to each device.
When a user says "my computer is not working", your first job is to decide which layer is failing. A dead laptop with no lights is a hardware or power problem. A laptop that shows the maker's logo but then a blue screen is usually an OS or driver problem. A laptop that starts fine but Excel crashes is a software problem.
flowchart TD
A[User: PC not working] --> B{Any lights or fan noise?}
B -- No --> C[Power / hardware layer]
B -- Yes --> D{Reaches Windows login?}
D -- No --> E[Boot / OS layer]
D -- Yes --> F{Problem in one app or device?}
F -- App --> G[Software layer]
F -- Device --> H[Driver layer]Ravi from Accounts says: "My laptop switches on, I see the Dell logo, then it restarts again and again."
Lights and logo appear, so power and basic hardware are working.
It never reaches the login screen, so the problem is in the boot / OS layer.
Answer: start with boot troubleshooting (Safe Mode, Startup Repair), not with reinstalling apps.
Inside the box: the main PC components
Users describe symptoms, not parts. You must turn "it makes a clicking noise" or "it is very slow" into the part that is likely at fault.
Every desktop and laptop has the same core parts, even if a laptop packs them more tightly.
| Part | What it does | Common failure symptom |
|---|---|---|
| CPU (processor) | Runs instructions; the "brain" | Overheating, sudden shutdowns |
| RAM (memory) | Short-term working space | Slowness, random crashes, beeps at start |
| Storage (HDD/SSD) | Keeps files and Windows permanently | "No boot device", clicking, very slow |
| Motherboard | Connects all parts together | Nothing works even with good power |
| PSU / adapter | Converts mains power for the PC | No lights at all, random restarts |
| GPU (graphics) | Draws the picture on screen | No display, lines on screen |
Supporting parts matter too: fans and heat sinks keep the CPU cool, the network card (Wi-Fi or Ethernet) connects to the office network, and the CMOS battery, a coin cell (usually a CR2032), keeps the BIOS clock and settings when the PC is unplugged.
A desktop shows the wrong date and time every morning, and BIOS settings reset.
The clock and BIOS settings are kept alive by the CMOS battery when mains power is off.
If they reset after every shutdown, that battery is likely dead.
Answer: replace the CMOS coin-cell battery.
A user hears a repeated "click… click" and the PC takes ten minutes to open a folder.
SSDs have no moving parts, so they do not click; hard disk drives (HDDs) have a spinning platter and a moving arm.
A clicking HDD is a classic sign of mechanical failure.
Answer: back up the user's data immediately and raise a disk replacement.
A desktop has power lights and fans spinning, but the monitor shows "No signal". Which part is the most likely first suspect after checking the cable?
Fans and lights mean power is fine. "No signal" means the monitor gets nothing, so check the video output: the right port and the graphics card.
CPU and RAM: speed, cores and memory
"My PC is slow" is one of the most common tickets. Knowing what the CPU and RAM do tells you where to look.
CPU basics
The CPU runs program instructions. Three words come up in interviews:
- Clock speed (GHz): how many cycles per second. 3.2 GHz means 3.2 billion cycles per second.
- Cores: separate processing units on one chip. A quad-core CPU can work on four tasks truly at the same time.
- Threads: with technologies like Hyper-Threading, one core can handle two threads, so a 4-core CPU may show 8 logical processors in Task Manager.
RAM basics
RAM is volatile: it loses everything when power goes off. That is why unsaved work disappears in a power cut. Office laptops commonly ship with 8 GB or 16 GB. RAM types are DDR3, DDR4 and DDR5; they are not interchangeable because the slots are keyed differently. Laptops use smaller SO-DIMM modules, desktops use full-size DIMM modules.
When RAM is full, Windows moves less-used data to a file on disk called the page file (pagefile.sys). Disk is far slower than RAM, so the PC slows down badly.
Task Manager → Performance shows CPU 12%, Memory 96%, Disk 100%.
Memory is almost full, so Windows is paging to disk, which explains the disk at 100%.
The CPU is mostly idle, so it is not the bottleneck.
Answer: close heavy apps or browser tabs now; recommend a RAM upgrade if this is normal use.
A CPU has 6 cores and supports two threads per core.
Logical processors = cores × threads per core = 6 × 2.
Answer: Task Manager shows 12 logical processors.
Keep going with the full course
Day 1 has 22 pages. You have read the first 3.
See what's inside →