Seating Arrangement: formulas, shortcuts & solved examples
What it is
Seating arrangement puzzles give a set of clues about where people sit, in a row, around a circle or around a table. You have to place everyone correctly. Most questions then ask who sits at a particular spot or who is next to whom. The main skill is fixing certain positions first and using them to settle the uncertain ones.
Key rules
Linear rows
- When people face north, their right is your right as you look at the diagram. When they face south, their left and right are reversed compared with your view.
- "Immediate right" means the very next seat. "Second to the right" means skip one seat.
- "At an end" means the first or last seat of the row.
Circular tables facing the centre
- When people face the centre, their left is the clockwise direction and their right is anticlockwise.
- With an even number of people, each seat has exactly one seat directly opposite it.
- In a circle of n people, each person has two neighbours.
Facing outward
If people face away from the centre, the directions flip: left becomes anticlockwise and right becomes clockwise.
Shortcuts
Shortcut 1: Place the definite clues first
Start with clues that fix a seat outright, such as "C is in the middle" or "A is at the left end." Clues that only describe relations between people are easier to use once some seats are filled.
Shortcut 2: Number the seats
Label the seats 1 to n, from left to right for a row or clockwise for a circle. Converting each clue into seat arithmetic, such as "B = A + 1," removes any confusion about direction.
Shortcut 3: Branch, then eliminate
If a clue allows two placements, sketch both side by side. A later negative clue, such as "S is not adjacent to P," usually rules one of them out.
Solved examples
Example 1
Five friends, P, Q, R, S and T, sit in a row facing north. R is in the middle. P is at the left end. T is immediately to the right of R. S is not next to P. Who is second from the right end?
Seats 1 to 5, from left to right: P = 1, R = 3, T = 4. That leaves seats 2 and 5 for Q and S. Seat 2 is next to P, so S must take seat 5 and Q takes seat 2. The order is P, Q, R, T, S. Answer: T is second from the right.
Example 2
Six colleagues, A, B, C, D, E and F, sit around a circular table facing the centre. A is opposite D. B is immediately to the left of A. E is opposite B. C is not next to A. Who sits between A and E?
Number the seats 0 to 5 clockwise, with A = 0 and D = 3. Left means clockwise, so B = 1. E is opposite B, so E = 4. Seats 2 and 5 are left over. Seat 5 is next to A, so C must take seat 2 and F takes seat 5. Answer: F sits between A and E, and F is immediately to A's right.
Example 3
W, X, Y and Z sit around a square table facing the centre. W is opposite Y. X is immediately to the right of W. Who is immediately to the left of W?
Number the seats 0 to 3 clockwise, with W = 0 and Y = 2. Right means anticlockwise, so X = 3. That leaves seat 1 for Z. Seat 1 is clockwise from W, which is W's left. Answer: Z.
Example 4
Five people, A, B, C, D and E, sit in a row facing south. B is at their right end. D is second to the left of B. A and C are next to each other, and C is not at either end. Who sits between D and B?
Number the seats 1 to 5 from the sitters' own left, so B = 5 and D = 3. Seats 1, 2 and 4 remain for A, C and E. A and C must be adjacent, which is only possible in seats 1 and 2. C is not at an end, so C = 2, A = 1 and E = 4. Answer: E.
Working in the sitters' own frame avoids the north/south flip completely.
Common mistakes
- Getting left and right wrong when people face south or the centre. Decide the direction convention before you place the first person, and write it next to your diagram.
- Mixing up "immediate" and "second." "Second to the left" skips one seat. Treating it as the adjacent seat breaks the whole arrangement.
- Starting with relative clues. Placing relative clues before fixed ones leads to many branches. Always anchor the definite positions first.
- Forgetting that a circle wraps around. In a circle, the last seat is next to the first. Check both neighbours when you apply an adjacency rule.
- Not checking every clue at the end. Before you answer, go through each clue once against your final arrangement. One clue you forgot to use can mean a wrong answer.
Practice now: https://www.testsworld.com/mocks